EAGTAC M30LC2 Turbo Head LED Flashlight Module Replaceable Long Throw 604 Meters for Hunting Searching Tactical Torch 2*18650

Price: 119.90

LED

• CREE XM-L2 Cool White U4 LED

• CREE XM-L2 Neutral White U2 LED

• CREE XP-L HI V3 Cool White LED

• CREE XP-L HI V2 Neutral White LED

• 

Output and Runtime

• Regular mode (3+1 brightness levels)

• • Led lumen

  • • XM-L2 U4 CW:
      13485-1038/596/113/10

    • XM-L2 U2 NW:
      11165-835/478/90/8

    • XP-L V3 CW:
      11505-882/510/95/9

    • XP-L V2 NW:
      10705-820/474/88/8

  • ANSI FL-1 lumen

  • • XM-L2 U4 CW: 
      11025-855/503/96/8

    • XM-L2 U2 NW: 
      9025-703/412/78/7

    • XP-L V3 CW: 
      10035-775/455/88/8

    • XP-L V2 NW: 
      9325-720/441/85/7

  • Runtime:

  • 1/2.1/13/100+ hours (2xCR123A)
    1.8/3.5/22/200 hours (1×18650)

• Tactical mode (Two brightness levels + strobe)

• • Led lumen

  • • XM-L2 CW:
      13485-1038/365/Strobe I

    • XM-L2 NW:
      11165-835/313/Strobe I

  • ANSI FL-1 lumen

  • • XM-L2 CW:
      11025-855/291/Strobe I

    • XM-L2 NW:
      9025-703/264/Strobe I

  • Runtime:

  • 1/3.7 hours (2xCR123A)
    1.8/6 hours (1×18650)

• Seven hidden auxiliary outputs

• • Strobe/Disorienting strobe/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)9

• See other battery type runtime here.

Beam Profile

CREE XM-L2 U4 LED

• Center lux: 66,100 lux

• Center spot angle: 5.7°

• Spill light angle: 53.1°

• Beam distance: 562 yards / 514 meters

CREE XP-L HI V3 LED

• Center lux: 91,300 lux

• Beam distance: 659 yards / 604 meters

Operations

• Tactical forward clicky switch

• Basic

• • Turn on the light by pressing the tailcap button until it clicks.

  • Twist the head to select between three output levels.

  • To access the lowest 4th level, turn the head to 3rd level, then 2nd level, and then back to 3rd level within one second.

  • You can pre-selected output level before turning on the light.

  • 

• Advanced

• • Cycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.

• 

• • Switching between regular mode and tactical mode (default): Switch to 2nd output level and turn the flashlight on and off for 20 times.

  • Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To enable (or disable) this function (disable from factory), switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click). With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.

  • Energy saving feature (on by default): M30LC2 reduces output by 24% after 200 seconds at turbo mode. With this feature turned off, M30LC2 reduces output by 8% instead. To toggle this feature, twist the head to 3rd level and turn the flashlight on and off for 20 times. Once setting has been changed, LED will output 3 seconds at 100% (enable), or 1 second at 100% (disable).

Controls

Battery Type

• 2xCR123A, 2xRCR123A, or 1×18650 li-ion2

• 3xCR123A, or 3xRCR123A li-ion3

• 4xCR123A, or 2×18650 li-ion4

• Compatible battery diameter/length

• • 123A: (16-16.8mm/34-34.5mm)

  • 18650: (18-18.8mm/67-68.5mm)

• Read battery safety precaution

Operating voltage

• 2.7V – 12V

• Do not exceed 12V. Do not use four rechargeable CR123A.

What's included

• Spare O-rings

• Titanium coated Stainless steel pocket clip

• User manual

• Soft cigar holding grip

• Lanyard ring attachment ring

• Mil-Spec paracord lanyard w/ quick attachment clip

Two models

• Base

• • Comes with smooth aluminum head

• Kit

• • Comes with stainless steel bezel

  • Flashlight head come with front-mount thread for bezel and filter attachment

  • Cigar grip cover ring

  • Tail-stand rubber boot

  • ET54 diffuser filter

  • 3 cells extension body tube for three CR123A/RCR123A

  • 4 cells extension body tube for four CR123A or two 18650 li-ion

  • Aluminum CR123A battery spacer for extension body tube

Body tube extender

Extended runtime & Superior handling

Using 3*CR123A extender allows user to get 50% more runtime than standard 2*CR123A. 4*CR123A extender doubles the runtime.

We included a battery spacer for CR123A and RCR123A users when using the body extender. It slides directly into the end of the flashlight body tube and stabilize the battery from moving around the body tube.

Body extenders are included in the kit model, or as a stand-alone accessory.